Чи виконує IMTLab калібрування у Ternopil?

Так, IMTLab приймає замовлення від компаній Ternopil та працює з клієнтами по всій Україні.

Для яких компаній доступні послуги?

Послуги доступні для лабораторій, виробництв, сервісних компаній та організацій, які використовують засоби вимірювальної техніки.

Які документи отримує клієнт?

Клієнт отримує документи за результатами калібрування відповідно до застосовних вимог і процедур лабораторії.

Як замовити консультацію?

Залиште заявку через форму на сайті або зверніться до команди IMTLab, щоб уточнити перелік обладнання та умови виконання робіт.

Чи працюєте з Ternopil Region?

Так, IMTLab працює з клієнтами міста та області, а також з компаніями з інших регіонів України.

Services

On-site equipment calibration in Ternopil

IMTLab performs on-site calibration of measuring equipment directly at the premises of enterprises, laboratories, and production facilities in Ternopil and Ternopil Oblast. This format helps minimize downtime, avoid equipment dismantling, and maintain continuity of production or laboratory processes.

Our metrology engineers arrive at the customer’s site with the necessary reference equipment and perform calibration in accordance with ISO/IEC 17025 requirements, ensuring metrological traceability of results.

When should you order on-site calibration in Ternopil?

For enterprises in Ternopil, transporting measuring equipment to a laboratory is not always convenient or economically practical. This is especially true for stationary instruments, large-sized installations, production line equipment, or quality control systems whose dismantling may cause workflow delays.

On-site calibration allows the necessary metrological work to be performed directly at the equipment’s place of operation. This is relevant for food production facilities, laboratories, agricultural enterprises, machine-building companies, service organizations, and enterprises in Ternopil Oblast where measurement accuracy and process stability are important.

During the work, IMTLab specialists take into account the equipment’s operating conditions, the requirements of calibration methods, and the enterprise’s needs regarding deadlines and documentation.

Benefits of on-site calibration for enterprises in Ternopil

On-site calibration helps enterprises in Ternopil reduce time costs, lower the logistics burden, and avoid long equipment downtime. All work is performed directly at the customer’s premises in compliance with requirements for accuracy, traceability, and result documentation.

No need to dismantle equipment

Minimization of production downtime

Time savings on instrument delivery

Possibility of calibrating equipment at its place of operation

Work with laboratory, production, and control systems

Calibration certificates in accordance with ISO/IEC 17025

Metrological traceability of results

Professional on-site equipment calibration in Ternopil by IMTLab

What we calibrate on site

Methods and traceability

Documentation and Results

What equipment we calibrate on site

Depending on the type of equipment, operating conditions, and enterprise requirements, IMTLab performs on-site calibration of various measuring instruments in Ternopil and Ternopil Oblast.

non-automatic weighing instruments;
laboratory and industrial scales;
weights and mass standards;
testing machines;
pendulum impact testers;
hardness testers;
torque wrenches;
equipment for quality control and production processes.

Is the required type of calibration not listed?

Contact IMTLab specialists – we will check the technical feasibility of performing on-site calibration specifically for your equipment and offer the optimal work format for an enterprise in Ternopil or the region.

During on-site calibration, IMTLab uses approved methods and mobile reference equipment that ensures the accuracy and traceability of results in accordance with ISO/IEC 17025 requirements.

All measurement results have metrological traceability to national and international standards, so they can be used for internal quality control, audits, production documentation, and confirmation that the equipment complies with established requirements.

Calibration is performed by qualified metrology engineers, taking into account the conditions for performing work at the customer’s site.

Documentation after on-site calibration

calibration certificate in accordance with ISO/IEC 17025;
measurement results;
measurement uncertainty evaluation;
information on metrological traceability;
recommendations for further equipment operation.

IMTLab documentation can be used by enterprises in Ternopil for internal quality control, audits, confirmation of equipment accuracy, and support of management systems.

IMTLab helps enterprises in Ternopil maintain measurement accuracy, stability of production processes, and compliance with international metrological requirements.

We understand that correct measurement results are important for laboratories, manufacturing, service companies, and quality control systems, so we pay special attention to accuracy, reproducibility, and traceability of results.

If any additional questions arise regarding equipment, calibration conditions, or document preparation, IMTLab specialists will provide consultation and help select the optimal work format.

IMTLab performs on-site calibration in Ternopil, as well as for enterprises in Ternopil Oblast, with prior agreement on the list of equipment, work schedule, and documentation requirements.

Request for on-site calibration in Ternopil

Fill out the form below, and IMTLab specialists will contact you to clarify the equipment type, number of instruments, and conditions for on-site calibration in Ternopil or Ternopil Oblast.

We will help select the optimal work format, agree on deadlines, prepare the documentation, and provide consultation on calibration in accordance with ISO/IEC 17025.

Request a Service

FAQ - On-site calibration in Ternopil

Can I order on-site calibration in Ternopil?

Yes. IMTLab performs on-site equipment calibration for enterprises, laboratories, and service organizations in Ternopil and Ternopil Oblast.

What equipment can be calibrated at the customer’s premises?

Various types of measuring equipment can be calibrated on site, depending on technical feasibility, operating conditions, and the requirements of the calibration method.

Are certificates valid after on-site calibration?

Yes. Based on the results of the work, the customer receives a calibration certificate in accordance with ISO/IEC 17025, including measurement results and uncertainty evaluation.

Do you work with Ternopil Oblast?

Yes. IMTLab works with enterprises in Ternopil and Ternopil Oblast, including manufacturing companies, laboratories, service organizations, and quality control enterprises.

How long does on-site calibration take?

The duration depends on the amount of equipment, the complexity of the work, and the calibration conditions. After receiving your request, we agree on the schedule and approximate completion time.

Why is on-site calibration convenient for enterprises in Ternopil?

The on-site format helps minimize downtime, avoid transporting equipment to the laboratory, and perform work directly at the equipment’s place of operation.

How can I order on-site calibration in Ternopil?

Submit a request through the website or contact an IMTLab manager. We will clarify the list of equipment, technical requirements, and work conditions, then prepare a proposal.